Betreiben eines "Eigenen Mailservers" = wirklich möglich?

Internet und Telefon gestört oder gar ganz ausgefallen? Speedprobleme, die nicht offensichtlich auf die verwendeten Geräte zurückzuführen sind? Dann ist dieses Forum genau richtig!
Forumsregeln
Forenregeln


Bitte gib bei der Erstellung eines Threads im Feld „Präfix“ an, ob du Kunde von Vodafone Kabel Deutschland („[VFKD]“), von Vodafone West („[VF West]“), von eazy („[eazy]“) oder von O2 über Kabel („[O2]“) bist.
Siegel

Re: Betreiben eines "Eigenen Mailservers" = wirklich möglich

Beitrag von Siegel »

bosta hat geschrieben:
Siegel hat geschrieben: @bosta, ich möchte mir nix mieten wenn ich die Möglichkeit besitze direkt das (Hardware) Zeug hier aufzustellen/betreiben.
So habe ich auch mal gedacht. Ich hatte die letztens 20 Jahre immer eigene Server hier.
Um das bei KD zu betreiben, geht ausgehende Mail nur noch über Smarthost.

Aber eigentlich ist ein Vserver sogar viel besser: Im Hintergrund richtige Server Hardware, um die man sich nicht mehr kümmern muss (Anschaffung, Wartung), viel größere Bandbreite, ein oder mehrere feste IP mit konfigurierbaren reverse DNS Namen und vorallem deutlich weniger Stromkosten! Selbst kleine Hardware verbraucht mindestens für 10 Euro Strom im Monat.
Auch keinerlei Probleme mehr wegen Blacklists.

Ich hatte auch immer wegen der Zuverlässigkeit so meine Bedenken bei Vservern. Läuft aber super stabil und ist sogar gut doppelt so schnell als mein vorheriger Home Server (AMD X2).
Genauso habe ich bis vor einigen Jahren auch gedacht und das Zeug von 1997-2004 bei externen Hostern (hauptsächlich 1und1 Rootserver) gemietet.

Damit bin ich mächtig aufs Maul geflogen.
Ich vertraue einfach keiner "Fremden" Plattform mehr meine Daten an.
Zumal die "vermeintlich" (seriösen) Angebote bei Hetzner & Co. immer mehr durch "billig" PC Hardware gestreckt wird.
Da laufen eben keine Xeon Prozessoren mit vernünftigen Intel LAN Chips sondern (aus Kostengründen) billiges i3/5/7 mit Realtek Gelump.

Da Lob ich mir mein soliden Sun Kram. der unter OpenBSD bei 30.000 Paketen pro Sekunden konsequent gähnend noch vor sich hin werkeln kann.

Wie gesagt, Smarthost ist keine Option. Da kann man sich den Einsatz eigener Hardware somit gänzlich sparen. Ich möchte eben nicht von der Konfigurationszensur eines SMTP Relay abhängig sein.
Zuletzt geändert von Siegel am 11.05.2012, 14:55, insgesamt 1-mal geändert.
Nach oben
Siegel

Re: Betreiben eines "Eigenen Mailservers" = wirklich möglich

Beitrag von Siegel »

@fLoo

genau und ich sitze gerne gelegentlich nackt auf dem Balkon, mit Bierchen und iPad in der Hand und stöbere etwas in Google Earth herum.

@sparkie

Die "Freiheit" Dinge nach meinen Bedürfnissen einrichten zu können, lasse ich mir ungern nehmen.
Smarthost & irgendwelche IPv6 zugewiesene Adressen auf Rootservern gehören da nicht mit rein ;)
Nach oben
sparkie
Kabelexperte
Beiträge: 721
Registriert: 04.09.2010, 12:35

Re: Betreiben eines "Eigenen Mailservers" = wirklich möglich

Beitrag von sparkie »

Siegel hat geschrieben:Die "Freiheit" Dinge nach meinen Bedürfnissen einrichten zu können, lasse ich mir ungern nehmen.
Smarthost & irgendwelche IPv6 zugewiesene Adressen auf Rootservern gehören da nicht mit rein ;)
freier als mit eigenem RootServer, nativem IPv6 und funktionierendem Reverse-DNS kannst du nicht sein. Genau deswegen werde ich es fuer mich so realisieren:-)

- sparkie
Nach oben
Siegel

Re: Betreiben eines "Eigenen Mailservers" = wirklich möglich

Beitrag von Siegel »

sparkie hat geschrieben:
Siegel hat geschrieben:Die "Freiheit" Dinge nach meinen Bedürfnissen einrichten zu können, lasse ich mir ungern nehmen.
Smarthost & irgendwelche IPv6 zugewiesene Adressen auf Rootservern gehören da nicht mit rein ;)
freier als mit eigenem RootServer und funktionierendem Reverse-DNS wirst du nicht sein. Genau deswegen werde ich es so machen-)

- sparkie
Doch ... mit laufender Hardware im eigenen Haus und funktionierendem Reverse-DNS ;)
Nach oben
sparkie
Kabelexperte
Beiträge: 721
Registriert: 04.09.2010, 12:35

Re: Betreiben eines "Eigenen Mailservers" = wirklich möglich

Beitrag von sparkie »

Siegel hat geschrieben:Doch ... mit laufender Hardware im eigenen Haus und funktionierendem Reverse-DNS ;)
das gibt es natuerlich auch. Aber von Providern die in einer anderen Preiskategorie als KDG angesiedelt sind.
Nach oben
Siegel

Sun Boot + sendEmail

Beitrag von Siegel »

Code: Alles auswählen

SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses

Sun Fire V245, No Keyboard
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.4, 8192 MB memory installed, Serial #aabbccdd.
Ethernet address aa:bb:cc:dd:ee:ff, Host ID: aabbccdd.



Rebooting with command: boot                                          
Boot device: disk:a  File and args: 
SILO Version 1.4.14
boot: 
Allocated 64 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.32
Loading initial ramdisk (10935883 bytes at 0x127F000000 phys, 0x40C00000 virt)...
/
[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.30.4 2009/08/19 07:18'
[    0.000000] PROMLIB: Root node compatible: 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-sparc64-smp (Debian 2.6.32-44) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 9 23:40:22 UTC 2012
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: aa:bb:cc:dd:ee:ff
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /ebus@1f,464000/serial@2,80
[    0.000000] PROM: Built device tree with 102232 bytes of memory.
[    0.000000] Top of RAM: 0x127ff06000, Total RAM: 0x1ffe74000
[    0.000000] Memory hole size: 67584MB
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/0
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/0
[    0.000000] [0000010000800000-fffff80000c00000] page_structs=131072 node=0 entry=2/0
[    0.000000] [0000010000800000-fffff80001000000] page_structs=131072 node=0 entry=3/0
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/0
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/0
[    0.000000] [0000010004800000-fffff80001c00000] page_structs=131072 node=0 entry=18/0
[    0.000000] [0000010004800000-fffff80002000000] page_structs=131072 node=0 entry=19/0
[    0.000000] [0000010020000000-fffff80002400000] page_structs=131072 node=0 entry=128/0
[    0.000000] [0000010020000000-fffff80002800000] page_structs=131072 node=0 entry=129/0
[    0.000000] [0000010020800000-fffff80002c00000] page_structs=131072 node=0 entry=130/0
[    0.000000] [0000010020800000-fffff80003000000] page_structs=131072 node=0 entry=131/0
[    0.000000] [0000010024000000-fffff80003400000] page_structs=131072 node=0 entry=144/0
[    0.000000] [0000010024000000-fffff80003800000] page_structs=131072 node=0 entry=145/0
[    0.000000] [0000010024800000-fffff80003c00000] page_structs=131072 node=0 entry=146/0
[    0.000000] [0000010024800000-fffff80004000000] page_structs=131072 node=0 entry=147/0
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0093ff83
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[10] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00040000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000]     0: 0x00800000 -> 0x00840000
[    0.000000]     0: 0x00900000 -> 0x0093f7ff
[    0.000000]     0: 0x0093f800 -> 0x0093fef3
[    0.000000]     0: 0x0093fef5 -> 0x0093ff2c
[    0.000000]     0: 0x0093ff30 -> 0x0093ff38
[    0.000000]     0: 0x0093ff4c -> 0x0093ff50
[    0.000000]     0: 0x0093ff70 -> 0x0093ff74
[    0.000000]     0: 0x0093ff82 -> 0x0093ff83
[    0.000000] Booting Linux...
[    0.000000] PERCPU: Embedded 7 pages/cpu @fffff80004400000 s25aaa r8192 daabbccdd uaabbccddee
[    0.000000] pcpu-alloc: s25aaa r8192 daabbcc uaabbccddee alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 972602
[    0.000000] Kernel command line: root=/dev/mapper/146--52--xxx--xxx--dynip-root ro
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[    0.000000] Memory: 8291224k available (3448k kernel code, 1432k data, 240k init) [fffff80000000000,000000127aabbccddee]
[    0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[320000] shift[16]
[    0.000000] clockevent: mult[51eb851] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[    0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.30.4 2009/08/19 07:18'
[    0.000000] PROMLIB: Root node compatible: 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-sparc64-smp (Debian 2.6.32-44) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 9 23:40:22 UTC 2012
[    0.000000] bootconsole [earlyprom0] enabled
[    0.000000] ARCH: SUN4U
[    0.000000] Ethernet address: aa:bb:cc:dd:ee:ff
[    0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.000000] Remapping the kernel... done.
[    0.000000] OF stdout device is: /ebus@1f,464000/serial@2,80
[    0.000000] PROM: Built device tree with 102232 bytes of memory.
[    0.000000] Top of RAM: 0x127ff06000, Total RAM: 0x1ffe74000
[    0.000000] Memory hole size: 67584MB
[    0.000000] [0000010000000000-fffff80000400000] page_structs=131072 node=0 entry=0/0
[    0.000000] [0000010000000000-fffff80000800000] page_structs=131072 node=0 entry=1/0
[    0.000000] [0000010000800000-fffff80000c00000] page_structs=131072 node=0 entry=2/0
[    0.000000] [0000010000800000-fffff80001000000] page_structs=131072 node=0 entry=3/0
[    0.000000] [0000010004000000-fffff80001400000] page_structs=131072 node=0 entry=16/0
[    0.000000] [0000010004000000-fffff80001800000] page_structs=131072 node=0 entry=17/0
[    0.000000] [0000010004800000-fffff80001c00000] page_structs=131072 node=0 entry=18/0
[    0.000000] [0000010004800000-fffff80002000000] page_structs=131072 node=0 entry=19/0
[    0.000000] [0000010020000000-fffff80002400000] page_structs=131072 node=0 entry=128/0
[    0.000000] [0000010020000000-fffff80002800000] page_structs=131072 node=0 entry=129/0
[    0.000000] [0000010020800000-fffff80002c00000] page_structs=131072 node=0 entry=130/0
[    0.000000] [0000010020800000-fffff80003000000] page_structs=131072 node=0 entry=131/0
[    0.000000] [0000010024000000-fffff80003400000] page_structs=131072 node=0 entry=144/0
[    0.000000] [0000010024000000-fffff80003800000] page_structs=131072 node=0 entry=145/0
[    0.000000] [0000010024800000-fffff80003c00000] page_structs=131072 node=0 entry=146/0
[    0.000000] [0000010024800000-fffff80004000000] page_structs=131072 node=0 entry=147/0
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0093ff83
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[10] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00040000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000]     0: 0x00800000 -> 0x00840000
[    0.000000]     0: 0x00900000 -> 0x0093f7ff
[    0.000000]     0: 0x0093f800 -> 0x0093fef3
[    0.000000]     0: 0x0093fef5 -> 0x0093ff2c
[    0.000000]     0: 0x0093ff30 -> 0x0093ff38
[    0.000000]     0: 0x0093ff4c -> 0x0093ff50
[    0.000000]     0: 0x0093ff70 -> 0x0093ff74
[    0.000000]     0: 0x0093ff82 -> 0x0093ff83
[    0.000000] Booting Linux...
[    0.000000] PERCPU: Embedded 7 pages/cpu @fffff80004400000 s25aaaa r8192 daabbcc uaabbccdd
[    0.000000] pcpu-alloc: s25aacc r8192 d23168 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 972602
[    0.000000] Kernel command line: root=/dev/mapper/146--52--xxx--xxx--dynip-root ro
[    0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[    0.000000] Memory: 8291224k available (3448k kernel code, 1432k data, 240k init) [fffff80000000000,000000127ff06000]
[    0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:255
[    0.000000] clocksource: mult[320000] shift[16]
[    0.000000] clockevent: mult[51eb851] shift[32]
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled, bootconsole disabled
[   50.126009] Calibrating delay using timer specific routine.. 40.01 BogoMIPS (lpj=80028)
[   50.126054] Security Framework initialized
[   50.126072] SELinux:  Disabled at boot.
[   50.126091] Mount-cache hash table entries: 512
[   50.126403] Initializing cgroup subsys ns
[   50.126414] Initializing cgroup subsys cpuacct
[   50.126436] Initializing cgroup subsys devices
[   50.126444] Initializing cgroup subsys freezer
[   50.126451] Initializing cgroup subsys net_cls
[   50.127587] CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 8 cycles)
[   50.127600] Brought up 2 CPUs
[   50.128030] devtmpfs: initialized
[   50.128600] regulator: core version 0.5
[   50.128718] NET: Registered protocol family 16
[   50.131406] Testing NMI watchdog ... OK.
[   50.211423] Performance events: Supported PMU type is 'ultra3i'
[   50.212147] /pci@1e,600000: SUN4U PCIE Bus Module
[   50.212158] /pci@1e,600000: PCI IO[7f810000000] MEM[7f900000000]
[   50.215656] /pci@1e,600000: MSI Queue first[0] num[36] count[128] devino[0x18]
[   50.215671] /pci@1e,600000: MSI first[0] num[256] mask[0xff] width[32]
[   50.215681] /pci@1e,600000: MSI addr32[0x7fff0000:0x10000] addr64[0x3ffff0000:0x10000]
[   50.215698] /pci@1e,600000: MSI queues at RA [000000127e180000]
[   50.215709] PCI: Scanning PBM /pci@1e,600000
[   50.215891] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[   50.215907] pci 0000:02:00.0: PME# disabled
[   50.216013] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[   50.216026] pci 0000:03:01.0: PME# disabled
[   50.216129] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[   50.216142] pci 0000:04:00.0: PME# disabled
[   50.216269] pci 0000:05:1c.0: PME# supported from D0 D1 D2 D3hot D3cold
[   50.216282] pci 0000:05:1c.0: PME# disabled
[   50.216405] pci 0000:05:1c.1: PME# supported from D0 D1 D2 D3hot D3cold
[   50.216419] pci 0000:05:1c.1: PME# disabled
[   50.216558] pci 0000:05:1c.3: PME# supported from D0 D3hot D3cold
[   50.216571] pci 0000:05:1c.3: PME# disabled
[   50.216833] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[   50.216846] pci 0000:03:02.0: PME# disabled
[   50.216949] pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
[   50.216962] pci 0000:03:08.0: PME# disabled
[   50.217063] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
[   50.217075] pci 0000:03:09.0: PME# disabled
[   50.217186] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[   50.217198] pci 0000:08:00.0: PME# disabled
[   50.217351] pci 0000:09:04.0: PME# supported from D3hot
[   50.217363] pci 0000:09:04.0: PME# disabled
[   50.217512] pci 0000:09:04.1: PME# supported from D3hot
[   50.217524] pci 0000:09:04.1: PME# disabled
[   50.217709] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
[   50.217721] pci 0000:03:0a.0: PME# disabled
[   50.217832] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[   50.217844] pci 0000:0b:00.0: PME# disabled
[   50.217997] pci 0000:0c:04.0: PME# supported from D3hot
[   50.218009] pci 0000:0c:04.0: PME# disabled
[   50.218182] pci 0000:0c:04.1: PME# supported from D3hot
[   50.218195] pci 0000:0c:04.1: PME# disabled
[   50.219626] /pci@1f,700000: SUN4U PCIE Bus Module
[   50.219641] /pci@1f,700000: PCI IO[7f610000000] MEM[7f700000000]
[   50.223306] /pci@1f,700000: MSI Queue first[0] num[36] count[128] devino[0x18]
[   50.223332] /pci@1f,700000: MSI first[0] num[256] mask[0xff] width[32]
[   50.223345] /pci@1f,700000: MSI addr32[0x7fff0000:0x10000] addr64[0x3ffff0000:0x10000]
[   50.223362] /pci@1f,700000: MSI queues at RA [000000127e400000]
[   50.223373] PCI: Scanning PBM /pci@1f,700000
[   50.223555] pci 0001:02:00.0: PME# supported from D0 D3hot D3cold
[   50.223571] pci 0001:02:00.0: PME# disabled
[   50.223673] pci 0001:02:00.2: PME# supported from D0 D3hot D3cold
[   50.223686] pci 0001:02:00.2: PME# disabled
[   50.224957] bio: create slab <bio-0> at 0
[   50.225255] vgaarb: loaded
[   50.225711] /pci@1e,600000/pci@0/pci@1/pci@0/isa@1e/rtc@0,70: RTC regs at 0x7f810000070
[   50.226124] Switching to clocksource stick
[   50.229237] NET: Registered protocol family 2
[   50.229479] IP route cache hash table entries: 262144 (order: 8, 2097152 bytes)
[   50.232422] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[   50.249435] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[   50.251530] TCP: Hash tables configured (established 524288 bind 65536)
[   50.251548] TCP reno registered
[   50.251803] NET: Registered protocol family 1
[   50.252166] Unpacking initramfs...
[   50.636961] Freeing initrd memory: 10679k freed
[   50.637720] power: Control reg at 7fff3000040
[   50.637924] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0
[   50.637952] chmc: UltraSPARC-IIIi memory controller at /memory-controller@1,0
[   50.638133] audit: initializing netlink socket (disabled)
[   50.638168] type=2000 audit(0.597:1): initialized
[   50.643097] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[   50.646481] VFS: Disk quotas dquot_6.5.2
[   50.646642] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[   50.646807] msgmni has been set to 16216
[   50.647330] alg: No test for stdrng (krng)
[   50.647455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   50.647475] io scheduler noop registered
[   50.647486] io scheduler anticipatory registered
[   50.647496] io scheduler deadline registered
[   50.647633] io scheduler cfq registered (default)
[   50.650410] [drm] Initialized drm 1.1.0 20060810
[   50.650719] f009394c: ttyS0 at MMIO 0x7fff2000080 (irq = 13) is a 16550A
[   50.650736] Console: ttyS0 (SU)
[   61.996571] console [ttyS0] enabled
[   62.042578] f00954ac: ttyS1 at MMIO 0x7fff2000040 (irq = 14) is a 16550A
[   62.131219] Uniform Multi-Platform E-IDE driver
[   62.190890] ide-gd driver 1.18
[   62.231208] mice: PS/2 mouse device common for all mice
[   62.300252] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[   62.383951] rtc0: no alarms, 242 bytes nvram
[   62.440913] TCP cubic registered
[   62.483602] NET: Registered protocol family 10
[   62.543670] Mobile IPv6
[   62.575809] NET: Registered protocol family 17
[   62.634401] registered taskstats version 1
[   62.689230] rtc_cmos rtc_cmos: setting system clock to 2012-05-10 15:08:35 UTC (1336662515)
[   62.799274] Initalizing network drop monitor service
Loading, please wait...
[   62.902020] udev[52]: starting version 164
[   63.063681] usbcore: registered new interface driver usbfs
[   63.077184] alim15x3 0000:05:1f.0: IDE controller (0x10b9:0x5229 rev 0xc8)
[   63.077269] alim15x3 0000:05:1f.0: 100% native mode on irq 7
[   63.077286]     ide0: BM-DMA at 0x7f810001000-0x7f810001007
[   63.077311]     ide1: BM-DMA at 0x7f810001008-0x7f81000100f
[   63.134696] tg3.c:v3.116 (December 3, 2010)
[   63.136157] SCSI subsystem initialized
[   63.161355] tg3 0000:09:04.0: eth0: Tigon3 [partno(BCM95714) rev 9003] (PCIX:133MHz:64-bit) MAC address aa:bb:cc:dd:ee:ff
[   63.161366] tg3 0000:09:04.0: eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   63.161373] tg3 0000:09:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   63.161379] tg3 0000:09:04.0: eth0: dma_rwctrl[76148000] dma_mask[32-bit]
[   63.161615] Fusion MPT base driver 3.04.12
[   63.161618] Copyright (c) 1999-2008 LSI Corporation
[   63.191256] tg3 0000:09:04.1: eth1: Tigon3 [partno(BCM95714) rev 9003] (PCIX:133MHz:64-bit) MAC address aa:bb:cc:dd:ee:ff
[   63.191265] tg3 0000:09:04.1: eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   63.191272] tg3 0000:09:04.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   63.191278] tg3 0000:09:04.1: eth1: dma_rwctrl[76148000] dma_mask[32-bit]
[   63.191495] Fusion MPT SAS Host driver 3.04.12
[   63.191706] mptbase: ioc0: Initiating bringup
[   63.212401] tg3 0000:0c:04.0: eth2: Tigon3 [partno(BCM95714) rev 9003] (PCIX:133MHz:64-bit) MAC address aa:bb:cc:dd:ee:ff
[   63.212413] tg3 0000:0c:04.0: eth2: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   63.212420] tg3 0000:0c:04.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   63.212426] tg3 0000:0c:04.0: eth2: dma_rwctrl[76148000] dma_mask[32-bit]
[   63.232319] tg3 0000:0c:04.1: eth3: Tigon3 [partno(BCM95714) rev 9003] (PCIX:133MHz:64-bit) MAC address aa:bb:cc:dd:ee:ff
[   63.232327] tg3 0000:0c:04.1: eth3: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   63.232334] tg3 0000:0c:04.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   63.232339] tg3 0000:0c:04.1: eth3: dma_rwctrl[76148000] dma_mask[32-bit]
[   63.478866] hda: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
[   63.814666] hda: UDMA/33 mode selected
[   63.894277] ioc0: LSISAS1064 A3: Capabilities={Initiator}
[   64.382500] ide0 at 0x7f810001040-0x7f810001047,0x7f810001082 on irq 7
[   64.382568] ide1 at 0x7f8100010c0-0x7f8100010c7,0x7f810001102 on irq 7
[   64.452738] ide-cd driver 5.00
[   66.030361] usbcore: registered new interface driver hub
[   66.100441] ide-cd: hda: ATAPI
[   66.100482] usbcore: registered new device driver usb
[   66.106200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   66.106255] ehci_hcd 0000:05:1c.3: EHCI Host Controller
[   66.106305] ehci_hcd 0000:05:1c.3: new USB bus registered, assigned bus number 1
[   66.106381] ehci_hcd 0000:05:1c.3: debug port 1
[   66.106391] ehci_hcd 0000:05:1c.3: Enabling legacy PCI PM
[   66.589754]  24X
[   66.591340] ehci_hcd 0000:05:1c.3: irq 6, io mem 0x7f900200000
[   66.690665]  DVD-ROM
[   66.691290] ehci_hcd 0000:05:1c.3: USB 2.0 started, EHCI 1.00
[   66.691349] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   66.691355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   66.691360] usb usb1: Product: EHCI Host Controller
[   66.691364] usb usb1: Manufacturer: Linux 2.6.32-5-sparc64-smp ehci_hcd
[   66.691368] usb usb1: SerialNumber: 0000:aa:bb:cc
[   66.691711] usb usb1: configuration #1 chosen from 1 choice
[   66.691935] hub 1-0:1.0: USB hub found
[   66.691959] hub 1-0:1.0: 8 ports detected
[   66.797510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   66.797564] ohci_hcd 0000:05:1c.0: OHCI Host Controller
[   66.797591] ohci_hcd 0000:05:1c.0: new USB bus registered, assigned bus number 2
[   66.797656] ohci_hcd 0000:05:1c.0: irq 5, io mem 0x7f901000000
[   67.691002]  DVD-R/RAM
[   67.695415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   67.695421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   67.695426] usb usb2: Product: OHCI Host Controller
[   67.695430] usb usb2: Manufacturer: Linux 2.6.32-5-sparc64-smp ohci_hcd
[   67.695434] usb usb2: SerialNumber: 0000:aa:bb:cc
[   67.695710] usb usb2: configuration #1 chosen from 1 choice
[   67.695861] hub 2-0:1.0: USB hub found
[   67.695886] hub 2-0:1.0: 3 ports detected
[   67.695988] ohci_hcd 0000:05:1c.1: OHCI Host Controller
[   67.696004] ohci_hcd 0000:05:1c.1: new USB bus registered, assigned bus number 3
[   67.696032] ohci_hcd 0000:05:1c.1: irq 5, io mem 0x7f902000000
[   68.536652]  CD-R/RW
[   68.543402] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   68.543408] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   68.543413] usb usb3: Product: OHCI Host Controller
[   68.543417] usb usb3: Manufacturer: Linux 2.6.32-5-sparc64-smp ohci_hcd
[   68.543421] usb usb3: SerialNumber: 0000:aa:bb:cc
[   68.543664] usb usb3: configuration #1 chosen from 1 choice
[   68.543797] hub 3-0:1.0: USB hub found
[   68.543822] hub 3-0:1.0: 3 ports detected
[   69.137047]  drive, 2048kB Cache
[   69.179537] Uniform CD-ROM driver Revision: 3.20
ata_id[129]: unable to open '/dev/hda'

[   69.371286] usb 3-1: new full speed USB device using ohci_hcd and address 2
[   69.562618] scsi0 : ioc0: LSISAS1064 A3, FwRev=01080400h, Ports=1, MaxQ=511, IRQ=10
[   69.643388] usb 3-1: New USB device found, idVendor=03eb, idProduct=3301
[   69.643394] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   69.643399] usb 3-1: Product: Standard USB Hub
[   69.643559] usb 3-1: configuration #1 chosen from 1 choice
[   69.665432] hub 3-1:1.0: USB hub found
[   69.671387] hub 3-1:1.0: 4 ports detected
[   70.108337] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500021677bd
[   70.236248] scsi 0:0:0:0: Direct-Access     SEAGATE  STAABBCCDD1LSUN72G  0556 PQ: 0 ANSI: 3
[   70.347809] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c50002169731
[   70.475620] scsi 0:0:1:0: Direct-Access     SEAGATE  STAABBCCDD1LSUN72G  0556 PQ: 0 ANSI: 3
[   70.587059] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c5000218dc75
[   70.714837] scsi 0:0:2:0: Direct-Access     SEAGATE  STAABBCCDD1LSUN72G  0556 PQ: 0 ANSI: 3
[   70.826308] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c5000218cd15
[   70.954101] scsi 0:0:3:0: Direct-Access     SEAGATE  STAABBCCDD1LSUN72G  0556 PQ: 0 ANSI: 3
[   71.083950] sd 0:0:0:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[   71.084063] sd 0:0:1:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[   71.084108] sd 0:0:3:0: [sdd] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[   71.085266] sd 0:0:1:0: [sdb] Write Protect is off
[   71.085303] sd 0:0:3:0: [sdd] Write Protect is off
[   71.087635] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   71.087946] sd 0:0:2:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[   71.088560] sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   71.089123] sd 0:0:2:0: [sdc] Write Protect is off
[   71.090488] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   71.090801]  sdb:
[   71.093446]  sdd:
[   71.094005]  sdc: sdb3
[   72.098445]  sdc3
[   72.121472] sd 0:0:0:0: [sda] Write Protect is off
[   72.121512] 
[   72.206360]  sdd3
[   72.236404] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   72.236558] sd 0:0:3:0: [sdd] Attached SCSI disk
[   72.239968] sd 0:0:2:0: [sdc] Attached SCSI disk
[   72.286456] sd 0:0:1:0: [sdb] Attached SCSI disk
[   72.537570]  sda: sda1 sda2 sda3
[   72.591600] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers[   72.888492] device-mapper: uevent: version 1.0.3
 ... done.
Begi[   72.953302] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
n: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...   Volume group "146-52-xxx-xxx-dynip" not found
  Skipping volume group 146-52-xxx-xxx-dynip
Unable to find LVM volume 146-52-xxx-xxx-dynip/root
  Volume group "146-52-xxxx-xxx-dynip" not found
  Skipping volume group 146-52-xxxx-xxx-dynip
Unable to find LVM volume 146-52-xxx-xxx-dynip/swap_1
Unlocking the disk /dev/disk/by-uuid/895d485f-0cf4-409a-9436-aabbccddeeff (sda2_crypt)
Enter passphrase: 
  Reading all physical volumes.  This may take a while...
  Found volume group "146-52-xxx-xxx-dynip" using metadata type lvm2
  2 logical volume(s) in volume group "146-52-xxxx-xxx-dynip" now active
cryptsetup: sda2_crypt set up successfully
done.
Begin:[   80.064436] kjournald starting.  Commit interval 5 seconds
 Running /script[   80.150150] EXT3-fs: mounted filesystem with ordered data mode.
s/local-premount ... done.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[   81.581362] udev[300]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...ata_id[350]: unable to open '/dev/hda'

done.
Checking root file system...fsck from util-linux-ng 2.17.2
/dev/mapper/146-[   82.602332] EXT3 FS on dm-1, -52--xxx-xxx--dyninternal journal
ip-root: clean, 25138/4292608 files, 451436/17154048 blocks (check after next mount)
done.
Starting early crypto disks...done.
Cleaning up ifupdown....
Setting up networking....
[   83.028550] loop: module loaded
Loading kernel modules...done.
Setting up LVM Volume Groups  Reading all physical volumes.  This may take a while...
  Found volume group "146-52-xxx-xxx-dynip" using metadata type lvm2
  2 logical volume(s) in volume group "146-52-xxx-xxx-dynip" now active
.
Starting remaining cry[   83.683074] Adding 2965488k swap on /dev/mapper/146--52--xxx--xxx--dynip-swap_1.  Priority:-1 extents:1 across:2965488k 
pto disks...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
/dev/sda1: clean, 29/48192 files, 20765/96390 blocks
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...Setting kernel variables ...done.
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting NFS common utilities: statd.
Starting enhanced syslogd: rsyslogd.
Starting deferred execution scheduler: atd.
[   85.791024] ADDRCONF(NETDEV_UP): eth3: link is not ready
[   85.924202] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   86.046752] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   86.172755] ADDRCONF(NETDEV_UP): eth1: link is not ready
Starting periodic command scheduler: cron.
Starting MTA: exim4.
Starting OpenBSD Secure Shell server: sshd.

Debian GNU/Linux 6.0 146-52-xxx-xxx-dynip ttyS0

146-52-xxx-xxx-dynip login: [   89.447801] tg3 0000:0c:04.1: eth3: Link is up at 1000 Mbps, full duplex
[   89.536035] tg3 0000:0c:04.1: eth3: Flow control is off for TX and off for RX
[   89.637995] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[   89.714473] tg3 0000:0c:04.0: eth2: Link is up at 1000 Mbps, full duplex
[   89.729190] tg3 0000:09:04.0: eth0: Link is up at 1000 Mbps, full duplex
[   89.729197] tg3 0000:09:04.0: eth0: Flow control is off for TX and off for RX
[   89.958065] tg3 0000:09:04.1: eth1: Link is up at 1000 Mbps, full duplex
[   89.958069] tg3 0000:09:04.1: eth1: Flow control is off for TX and off for RX
[   90.167064] tg3 0000:0c:04.0: eth2: Flow control is off for TX and off for RX
[   90.269296] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   90.352582] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   90.435910] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready

Debian GNU/Linux 6.0 146-52-xxx-xxx-dynip ttyS0

146-52-xxx-xxx-dynip login:

Code: Alles auswählen

root@146-52-xxx-xxx-dynip:~# sendEmail -f Absender@Adresse.tld -t Empfaenger@Adresse.tld -u Test -s server.tld:25 -xu smtpuser -xp smtppassword
Reading message body from STDIN because the '-m' option was not used.
If you are manually typing in a message:
  - First line must be received within 60 seconds.
  - End manual input with a CTRL-D on its own line.

hallo
May 10 17:06:00 146-52-xxx-xxx-dynip sendEmail[1660]: Message input complete.
May 10 17:06:00 146-52-xxxx-xxx-dynip sendEmail[1660]: NOTICE => Authentication not supported by the remote SMTP server!
May 10 17:06:01 146-52-xxxx-xxxx-dynip sendEmail[1660]: Email was sent successfully!
root@146-52-xxx-xxx-dynip:~#
Nach oben

Zurück zu „Störungen, Ausfälle und Speedprobleme“